Home > Product > Crimp tool kits

    PRECISETOOL KIT4012 (YJQ-W7Q&DWQ-CCSM1&DWQ-CSSF1&DWQ-CSSM2&BM-2&F2) Crimp Tool Kit

    1. KIT4010 Kit consists of YJQ-W7Q (Pneumatic Crimp Tool), DWQ-CCSM1, DWQ-CSSF1 (Positioners);
    2. Suitable for crimping of round contacts of MIL standard, Harting, Wain,TE connectors;
    3. HARTING Connector Model: HAN D-SUB series;
    4.Wain Connector Model: HM EMC-008 D-SUB HR23 series.
    1. Detailed information
    2. Video

    Brand: PRECISETOOL

    Standard: YJQ-W7Q&DWQ-CCSM1&DWQ-CSSF1&DWQ-CSSM2&BM-2&F2

    Weight (g): 2881

    Internal Number: KIT4012 

    Crimped Style: Four-indent Eight-impression


    YJQ-W7Q Crimping Tool is used for the cold-pressed connection of wires and contacts in electronic connectors.

    DWQ-CCSM1/CSSF1/CSSM2 is used to locate contacts horizontally and vertically between the indenters of the tools to ensure the accuracy and consistency of the crimp position. The height adjusting screw can be rotated until the contact is in the proper   position for crimping. Suitable for different types of contacts. 


    This kit contains two kinds of control mode:

    Figure1: Foot valve control mode

    Figure2: Hand valve control mode

    Using 1.54mm hex wrench


    Unscrewing the setting screw when in manual control (Unscrew 0-1mm above the reference plane, until manual control is recovered. Do not force the screw out to prevent the screw mechanism from damaging.)

    Screwing in the setting screw when in the foot valve control (Screwing 1-2mm into the reference plane, until foot valve control is recovered. Do not force into the screw to prevent the screw mechanism from damaging.)


    Features


    1. Mould Steel (Durable,pressure resistance,No deformation,nice appearance and will not rust)

    2. Four-indent pneumatic Crimp Tools (Crimp tension is 1.3 times that of the hexagonal crimp, more stable & more reliable)

    3. 8 Selector Numbers (Adjustable crimping ranges in different selector number, more convenient for wider applications)

     

    Crimp Principle


    The crimping tool adopts curve propulsion mechanism, its applied force transfers through four curves in the head cavity of the right plier handle to the four indenters. The four intenders do the centripetal linear motion, which makes its front-end teeth crimp the contact to complete the crimping process. The cycle controlled precision ratchet assures the consistency of impression and the crimping quality of wires and contacts.


    Applications


    Drawing

    Wain 50V 5A Cold pressure PIN

    HARTING CONTACTS

    1528769211342266.jpg



    1528769218851457.jpg



    1528769223564173.jpg

    CSSM -0.25

    09670007576

    CSSM -0.33

    09670005576

    CSSM -0.52

    09670008576

    CSSM -0.82(14.0)

    09670003576

    CSSF-0.25

    09670007476

    CSSF-0.33

    09670005476

    CSSF-0.52

    09670008476

    CSSF-0.82(13.6)

    09670003476

    CSGM -0.25


    CSGM -0.33


    CSGM -0.52


    CSGM -0.82(14.0)


    CSGF-0.25


    CSGF-0.33


    CSGF-0.52


    CSGF-0.82(13.6)



    ※Note:We can provide the pin removal tool for this series of electronic connectors:TL08


    7YON(MT`KL~M(L)AP}5ZPT0.jpg


    Crimping Instructions


    1527044550619202.jpg

    Step1:Put the contact


    1527044560449999.jpg

    Step2:Insert the wire


    1527044581946649.jpg

    Step3:Crimp and open the crimp tool

    1527044626856611.jpg

    Step 4 : Remove the crimped contact