网站首页 > Product > JRREADY YJQ-UDT5 Hand Hexagonal Crimp Tool
  1. JRREADY YJQ-UDT5 Hand Hexagonal Crimp Tool
  2. JRREADY YJQ-UDT5 Hand Hexagonal Crimp Tool
  3. JRREADY YJQ-UDT5 Hand Hexagonal Crimp Tool
  4. JRREADY YJQ-UDT5 Hand Hexagonal Crimp Tool
  5. JRREADY YJQ-UDT5 Hand Hexagonal Crimp Tool

JRREADY YJQ-UDT5 Hand Hexagonal Crimp Tool

1. This tool improves the reverse grip based on M22520/5-01, and it can be used with the base and fixed on the desktop;
2. A type of open frame hand crimp tool;
3. Used for crimping all kinds of ferrules, coaxial connectors, contacts, coalitions and wire terminal blocks;
4. Adapts M22520/5 series crimp dies.
/upload/manual/ENV/D12_UDT5_ENV_WB_P.pdf
  1. Detailed information
  2. Video
  3. 商城入口
  4. 规格说明书
  5. 使用说明书

Brand: JRREADY

Standard: /

Model: YJQ-UDT5

Crimp Style: /

Material: Mould Steel

Selector Numbers: /

Wire Size (AWG/mm²): /

Thru-hole Diameter (mm): /

Dimensions (mm): 279*62*22

Internal Number: D11

Weight (g): 625


YJQ-UDT5 is a type of open frame hand crimp tool designed based on M22520/5-01. This tool improves the reverse grip and it can be used with the base and fixed on the desktop; It is widely used for crimping all kinds of ferrules, coaxial connectors, contacts, coalitions and wire terminal blocks. With stroke lock device to ensure high reliability of crimp quality.

Interchangeable dies can be installed and fixed in a proper position with pins. According to the needs of customers, we can continuously develop new dies, and we can also specially design and manufacture tool kits.

Model of check tool: G155 (Note: the gage needs to purchase separately)

Crimp Styles


1528769902465661.png


Die Instructions

 

Die Installation

 

1. Align die rail slots in die halves with the rail in the crimp tool and push shank of dies into holes. Dies will snap into place. (See Figure 1)

2. Close tool handle to make sure dies are properly seated. The tool is now ready for use.

 

Die Removal

 

1. With the crimp tool handle open, place die removal tool against end hammer (See Figure 2). The die will be released from the front die holder. It can now be removed by hand.

2. Close the crimp tool handle and slide the die removal tool between the die and tool body (See Figure 3). Pull handle open with a snap action. The die will be released and can then be removed by hand.

 

Die Combination


1. Install the die on the crimp tool handle;

2. After installing the die, force the locking pin into the hole and keep it flush. The long locking pin is inserted into the tool frame and the short locking pin is inserted into the push rod (see Figure 4).

 

Note: Die removal tool part number HX3-82 is furnished with crimp tool. If die removal tool is not available, a rod approximately 3/16’’ diameter X 13/4’’ long may be used.

 



图片1.png图片2.png
图片3.pngWREFS.JPG



Applications


1528770125725232.jpg

Amphenol Contacts

1528770127870961.jpg

Shielded Wires

1528770305416230.jpg

Wrapped Contacts




197