Brand: JRREADY | Standard: / | Model: NPOK-2M |
Crimp Style: Four-indent Eight-impression | Material: Mould Steel | Selector Numbers: 8 |
Wire Size (AWG/mm²): 11 (4.0)-24 (0.2) | Thru-hole Diameter (mm): Φ5.60 | Dimensions (mm): 247*59*28 |
Internal Number: D38 | Weight (g): 652 | |
NPOK-2M is used in the crimping of the wires and Ø1.00/Ø1.50/Ø2.00 contacts in CHц23 (Chinese Model: ZH23) series electric connectors. | ||
Model of pneumatic crimp tool: NPOK-2M-Q | ||
Model of check tool: G56 (Note: the gage needs to purchase separately) |
The corresponding relationship between the crimped wires, contacts and selector numbers is shown in the following table:
Contacts Size | φ1 | φ1.5 | φ2 | ||||||
Wire Size | 0.2 | 0.35 | 0.5 | 0.75 | 0.75 | 1.00 | 1.50 | 2.50 | 4.00 |
Selector Numbers | 1 | 2 | 3 | 4 | 4 | 5 | 7 | 6 | 8 |
Insert Color | RED | BLUE | YELLOW |
Features
1. Material of Mould Steel (Good Durability & Good Anti-deformation & Good appearance & Anti-rust)
2. Four-indent Crimp Tool (Crimp tension is 1.3 times that of the hexagonal crimp, more stable & more reliable)
3.8 Selector Numbers (Adjustable crimping ranges in different selector number, more convenient for wider applications)
Crimp Range
Selector NO. | Intender Working Diameter mm/INCH | |
A(GO) | B止(NO GO) | |
1 | 0.81/0.032 | 0.94/0.037 |
2 | 0.91/0.036 | 1.04/0.041 |
3 | 0.99/0.039 | 1.12/0.041 |
4 | 1.14/0.0449 | 1.27/0.050 |
5 | 1.32/0.052 | 1.45/0.057 |
6 | 1.32/0.052 | 1.43/0.056 |
7 | 1.52/0.062 | 1.63/0.064 |
8 | 1.62/0.064 | 1.72/0.068 |
The crimping tool adopts curve propulsion mechanism, its applied force transfers through four curves in the head cavity of the right plier handle to the four indenters. The four intenders do the centripetal linear motion, which makes its front-end teeth crimp the contact to complete the crimping process. The cycle controlled precision ratchet assures the consistency of impression and the crimping quality of wires and contacts.
Crimping Instructions
Step 1 : Put the contact | Step 2 : Insert the wire | Step 3 : Crimp and open the crimp tool | Step 4 : Remove the crimped contact |