JRready DRK-RT1-Screwdriver Removal Tool JRready DRK-RT1-Screwdriver Removal Tool JRready DRK-RT1-Screwdriver Removal Tool JRready DRK-RT1-Screwdriver Removal Tool JRready DRK-RT1-Screwdriver Removal Tool

JRready DRK-RT1-Screwdriver Removal Tool

1. It is suitable for removing DEUTSCH 16# solid or stamped and formed (S&F) pins and sockets from the front release connectors (DT, DTM, DTV, DRB, DRCP and STRIKE*connectors);
2. Small size, easy to carry, and can be used outdoors;

Detailed information
Video
商城入口
规格说明书
使用说明书

Brand: JRready	Standard: /	Model: DRK-RT1-Screwdriver
Connector Type: DT Series Connectors	Material: 440C	Length (mm): 144.9
Internal Number: /	Weight (g): 19
DRK-RT1-Screwdriver removal tool is mainly used to remove 16# solid contacts in DEUTSCH DT series connectors.

Removal Tool Instruction

Removal Instruction for Sockets

1. Place the flat end of the removal tool on top of the wedge lock and lift it slowly and then remove it from the connector
(Note: Do not damage the outer seal)
2. Place the flat end of the removal tool in the snap position of sockets inside the connector, and then slowly pry it up
3. Pull out from the wire side and remove the contacts

Removal Instruction for Pins

1. Align the hooked end with the middle of the wedge lock, rotate the removal tool by 90 °and hook the wedge lock and pull it straight out of the connector
2. Place the flat end of the removal tool in the snap position of pins inside the connector, and then slowly pry it up
3. Pull out from the wire side and remove the contacts