JRready DRK-RT1 Removal Tools JRready DRK-RT1 Removal Tools JRready DRK-RT1 Removal Tools JRready DRK-RT1 Removal Tools JRready DRK-RT1 Removal Tools

JRready DRK-RT1 Removal Tools

1. It is suitable for removing DEUTSCH 16# solid or stamped and formed (S&F) pins and sockets from the front release connectors (DT, DTM, DTV, DRB, DRCP and STRIKE* connectors);
2. Small size, easy to carry, and can be used outdoors;

Detailed information
Video
商城入口
规格说明书
使用说明书

Brand: JRready	Standard: /	Model: DRK-RT1
Connector Model: DT Series	Material: 440C	Dimensions（mm）: 185
Internal Number: A67	Weight(g): 17.9
DRK-RT1 Removal Tool is mainly applied to remove 16# solid contacts in Deutsch DT connectors;

Removal Tool Instruction

Removal Instruction for Sockets

1. Place the flat end of the removal tool on top of the wedge lock and lift it slowly and then remove it from the connector

(Note: Do not damage the outer seal)

2. Place the flat end of the removal tool in the snap position of sockets inside the connector, and then slowly pry it up

3. Pull out from the wire side and remove the contacts

Removal Instruction for Pins

1. Align the hooked end with the middle of the wedge lock, rotate the removal tool by 90 °and hook the wedge lock and pull it straight out of the connector

2. Place the flat end of the removal tool in the snap position of pins inside the connector, and then slowly pry it up

3. Pull out from the wire side and remove the contacts