Features

1. Material of Mould Steel (Good Durability & Good Anti-deformation & Good appearance & Anti-rust)

2. Four-indent Crimp Tool (Crimp tension is 1.3 times that of the hexagonal crimp, more stable & more reliable)

3.8 Selector Numbers (Adjustable crimping ranges in different selector number, more convenient for wider applications)

Crimp Range

CONTACTS：12-20 #

The crimping tool adopts curve propulsion mechanism, its applied force transfers through four curves in the head cavity of the right plier handle to the four indenters. The four intenders do the centripetal linear motion, which makes its front-end teeth crimp the contact to complete the crimping process. The cycle controlled precision ratchet assures the consistency of impression and the crimping quality of wires and contacts. 

Installation of Different Series of Positioners

TP Series Positioners

UH2 Series Screw-adjustable Positioners

TH02、TH03 Series Turret Heads

Applications

Crimping Instructions

Instructions

1.Operate the tool to the fully closed working position. Set the crimp tool to the correct selector number 2.If the “GO” gage end (Green) can pass freely, but the NO-GO end (Red) can not pass completely, it means the tool is still qualified 3.If the “GO” gage end (Green) can not pass, but the NO-GO end (Red) can pass completely, it means the tool is not qualified

Maintenance

1.After using, the gage should be put into the special tool box to prevent the bending deformation of the gage pin.

2.Regularly wipe with antirust oil to ensure that the surface of gage pin is clean.

TOOL KIT5101（Include G125）

TOOL KIT（Include G125）