-
JRready U180 Die Set -
-
JRready U180 Die Set
1. For crimping AMPHENOL PIN 10-730764 & SOC 10-730179; Wire Size: 20-18AWG;
2. Positioning device integration;
3. Match Tools: YJQ-W5 and YJQ-UDT5./upload/manual/ENV/U180_U180_ENV_WB_P.pdf
Brand: JRready | Standard: / | Model: U180 |
Match Tools: YJQ-W5 YJQ-UDT5 | Material: Mould steel | Crimped Shape: Other |
Internal Number: U180 | Weight(g): 60 | Dimensions (mm): 25.4*50.8*13.39 |
| U180 die is suitable for crimping Amphenol contacts; high precision & smooth surface & integrated positioning device. | ||
Die Installation
1. Align die rail slots in die halves with the rail in the crimp tool and push shank of dies into holes. Dies will snap into place. (See Figure 1)
2. Close tool handle to make sure dies are properly seated. The tool is now ready for use
Die Removal
1. With the crimp tool handle open,place die removal tool against end hammer (See Figure 2). The die will be released from the front die holder. It can now be removed by hand
2. Close the crimp tool handle and slide the die removal tool between the die and tool body (See Figure 3). Pull handle open with a snap action. The die will be released and can then be removed by hand
