-
JRready G196 GO-NOGO Gage -
-
JRready G196 GO-NOGO Gage
1. Used for testing the indenter working diameter of crimping tools;
2. Go and No Go gauge integration for convenient use;
3. Designed according to M22520/6-16;
4. Accurate identification & replaceable gage pin to prevent misfit of gage pin;
5. Small size, easy to carry, convenient to outdoor use./upload/manual/ENV/G196_G196_ENV_WB_P.pdf
Brand: JRready | Standard: MIL-C-M22520/6-16 | Model: G196 |
Match Tool: DIE: Y138 | Material: GCr15 | Indenter Working Dia (in/mm): GO:0.3105 (7.89) - NO-GO: 0.3175 (8.06) |
Internal Number: G196 | Weight (g): 15 | |
| G196 is designed according to M22520/6-16. Each crimp tool has accurate intender working diameter. The gage is necessary to ensure the crimp tool is in proper working status before using or after being used for a certain period of time. | ||
Instructions
  | 1. Operate the die to be calibrated in working condition. 2. If the “GO” gage end (Green) can pass freely, but the NO-GO end (Red) can not pass completely, it means the tool is still qualified. 3. If the “GO” gage end (Green) can not pass, but the NO-GO end (Red) can pass completely, it means the tool is not qualified. |
Maintenance
1. After using, the gage should be put into the special tool box to prevent the bending deformation of the gage pin.
2. Regularly wipe with antirust oil to ensure that the surface of gage pin is clean.
197
