-
JRready 86-7 Positioner 
JRready 86-7 Positioner 
JRready 86-7 Positioner 
JRready 86-7 Positioner -
-
JRready 86-7 Positioner
1. Designed according to MIL-C-22520/7-08;
2. Suitable terminal model:MS27492-20/MS27493-20/ MS27494-20 MS27655-20
3. Match Tools: YJQ-W7A(manual) & YJQ-W7Q(pneumatic);/upload/manual/ENV/P1206_867_ENV_WB_P.pdf
Brand: JRready | Standard: MIL-C-22520/7-08(Not QPL) | Model: 86-7 |
Match Tools: YJQ-W7A YJQ-W7Q | Material: Copper | Dimension (mm): 23.62*22.1 |
Internal Number: P1206(copper) | Weight (g): 9.7 | |
| The 86-7 positioner is a fixed positioner designed according to the US military standard MIL-C-22520/7-08. It can be installed directly on the crimping tool and requires no adjustment. It is used to locate contacts horizontally and vertically between the indenters of the tools to ensure the accuracy and consistency of the crimp position. | ||
Installation of Positioner
1. Before installing the locator, the tool should be open
2. Remove the safety clip from positioner guide
3. Select the correct positioner for terminal crimping
4. Insert the positioner into positioner guide, push down and then rotate 90 °, until bayonet pins lock
5. Remove the spring clip from the selector knob, adjust it to the correct selector position
The company also produces the following military standard locators (customizable)
No. | Standard | MIL Standard | Suitable contact model |
1 | 86-2 | M22520/7-03 | MS3192&93 ,MS24254&55 |
2 | 86-3 | M22520/7-04 | MS27490-16,MS27491-16,MS27492-16,MS27493-16,MS27494-16,MS27655-16 |
3 | 86-4 | M22520/7-05 | MS27490-22,-22M,-22D,MS27655-22D |
4 | 86-5 | M22520/7-06 | MS27491-22,-22M,-22D |
5 | 86-6 | M22520/7-07 | MS27493-22/MS27494-22,-22M,-22D,M24308/13-1 |
6 | 86-7 | M22520/7-08 | MS27492-20/MS27493-20/ MS27494-20 MS27655-20 |
7 | 86-19 | M22520/7-11 | M39029/22-22-28 M39029/22-22-22 |
8 | 86-88 | / | DEUTSCH 2841-5-**00 2803-4-0**00 100060-** 2841-13-**00 2803-10-**00 |
